ARGOX OS 214 PLUS SERIES PPLA DRIVER FOR MAC

Press the “Feed” button for 10 seconds, and the “Ready” indicator and “Power” indicator will go off in order. Surface of heaters should NOT be hit or scratched by sharp or hard things to prevent any damage by scratch. Ribbon Pick-up Holder 8. After driver installation is complete, click “Close”. For Cutter mode you must first install the cutter and add the cutter baby board to J16 on the main board. Lift the top cover to expose the media compartment. Sato CG4 Series Printer.

Uploader: Groktilar
Date Added: 23 July 2016
File Size: 15.18 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 96384
Price: Free* [*Free Regsitration Required]

Secure the two screws for the base housing. Put the print head module down and insert the bare core into the pick-up holder. Desktop Label Printer CC.

Driver Argox OS Plus | Bz Tech

OsdOsOszOsdzOsplus. Argox OS plus User Manual 41 pages.

Put the print head module down and press down firmly until you hear a snap. These limits are designed to. This printer has been replaced by the Argox X Appendix I – Installing the Cutter 1. Lift the top cover to expose the media compartment. Hook the white roller on the brackets of the chassis, ensuring the long thinner end is on the left side. Replacing the Thermal Print Head 1.

PPL through which the host communicates with your printer. Warranty of print heads will be void if print head serial number is removed, altered, defected, or made illegible, under every circumstance. In addition to cutting backing argox os 214 plus series ppla, the full-cut cutter can also work on continuous labels with adhesive. Serial RS Interface Requirements The required cable must have a nine-pin “D” type male connector on one end, which is plugged into the mating serial port located on the back of the printer.

Important notice during TPH The ribbon may not be qualified. Zebra S4M Barcode Printer. Turn back the print head module argox os 214 plus series ppla then insert the bare core into the pick-up holder. Cutting occurs only when the software is properly set.

Cutter Mode Cutter Argox os 214 plus series ppla Note: Standard mode allows you to collect each label freely. Run the driver from Argox website.

Parallel Interface Requirements The required cable IEEE compliant is recommended must have a standard pin parallel connector on one end, which is plugged argox os 214 plus series ppla the parallel port located on the back of the printer. Connect the USB cable, Serial cable to the proper port on the printer and on your computer. This equipment generates, uses, and can radiate radio frequency energy and, if not.

Driver Argox OS-214 Plus

By pressing ‘print’ button you will print only current page. Remove the whole print head assembly by releasing the 4 screws at its feet. If you are looking for an entry level label printer, or an industrial label printer, Then you will find one to suit your purpose in the Argox os 214 plus series ppla label printer range.

Press the “Feed” button for 10 seconds, and the “Ready” indicator and “Power” indicator will go off in order.

Label DR. Sürücüsü (Driver) Kurulumu

Such proprietary information may not be used, reproduced. Sato CG2 Series Printer.

Check if the communication cable parallel or serial is connected securely to your parallel or serial port on the PC and to the connector on the afgox at the other end. Orientation Page order In Printing Preferences: Secure the two screws pplaa the base housing. With this argox os 214 plus series ppla you can run any popular Windows software applications such as MS-Word and print to this printer.

Trim the front edge of the label backing paper with scissors or a knife. We believe soon you will find that you have made a cleverest choice!

Page 24 Create a custom size Argox os 214 plus series ppla the Properties menu: Miscellaneous If the host shows “Printer Time out” 1. There are two parts to this manual, an operation guide and related information. Remove the whole print head assembly by releasing the 4 screws at its feet.

pluw

Got it, continue to print. It can deliver much smoother printing process and maintain top printing quality under high speed. Zebra ZM Barcode Printer. Make sure the power switch is in the “O” position. Troubleshooting Normally, when the 2114 is in not working properly, the “Power” LED blinks continuously; while printing and communication between the host and printer stops.

Argox I4 Barcode Printer.

Table of Contents Safety